gs gs123 Networking - IP Routing - Quiz No.1
gs gs123 Cryptography and Network Security Quiz
This quiz belongs to book/course code gs gs123 Cryptography and Network Security of gs organization. We have 112 quizzes available related to the book/course Cryptography and Network Security. This quiz has a total of 15 multiple choice questions (MCQs) to prepare and belongs to topic Networking. NVAEducation wants its users to help them learn in an easy way. For that purpose, you are free to prepare online MCQs and quizzes.
NVAEducation also facilitates users to contribute in online competitions with other students to make a challenging situation to learn in a creative way. You can create one to one, and group competition on an topic of a book/course code. Also on NVAEducation you can get certifications by passing the online quiz test.
Question 1: Which type of Ethernet framing is used for TCP/IP and DEC net?
Ethernet 802.3
Ethernet 802.2
Ethernet II
Ethernet SNAP
Question 2: Consider a situation in which you are a system administrator on a NetWare network, you are running NetWare 4.11 and you cannot communicate with your router. What is the likely problem?
NetWare 4.11 defaults to 802.2 encapsulation
NetWare 4.11 defaults to 802.3 encapsulation
Cisco routers only work with NetWare 3.11
NetWare 3.11 defaults to 802.2 encapsulation
Question 3: NetWare IPX addressing uses a network number and a node number. Which statement is not true?
The network address is administratively assigned and can be up to 16 hexadecimal digits long
The node address is always administratively assigned
The node address is usually the MAC address
If the MAC address is used as the node address, then IPX eliminates the use of ARP
Question 5: Which NetWare protocol provides link-state routing?
NLSP
RIP
SAP
NCP
Question 6: As a system administrator, you want to debug IGRP but are worried that the “debug IP IGRP transaction” command will flood the console. What is the command that you should use?
Debug IP IGRP event
Debug IP IGRP-events
Debug IP IGRP summary
Debug IP IGRP events
Question 7: What does the following series of commands “Router IGRP 71 network” accomplish?
10.0.0.0 router IGRP 109 network 172.68.7.0
10.0.0.0 router IGRP 109 network 172.68.7.0
It isolates networks 10.0.0.0 and 172.68.7.0
It loads IGRP for networks 109 and 71
It disables RIP
It disables all routing protocols
Question 8: The “IPX delay number” command will allow an administrator to change the default settings. What are the default settings?
For LAN interfaces, one tick; for WAN interfaces, six ticks
For LAN interfaces, six ticks; for WAN interfaces, one tick
For LAN interfaces, zero ticks; for WAN interfaces, five ticks
For LAN interfaces, five ticks; for WAN interfaces, zero Ticks
Question 9: As a system administrator, you need to set up one Ethernet interface on the Cisco router to allow for both sap and Novell-ether encapsulations. Which set of commands will accomplish this?
Interface Ethernet 0.1 IPX encapsulation Novell-ether IPX network 9e interface Ethernet 0.2 IPX network 6c
Interface Ethernet 0 IPX encapsulation Novell-ether IPX network 9e interface Ethernet 0 IPX encapsulation sap IPX network 6c
Interface Ethernet 0.1 IPX encapsulation Novell-ether interface Ethernet 0.2 IPX encapsulation sap
Interface Ethernet 0.1ipx encapsulation Novell-ether IPX network 9e interface Ethernet 0.2 IPX encapsulation sap IPX network 6c
Question 10: What does the “IPX maximum-paths 2” command accomplish?
It enables load sharing on 2 paths if the paths are equal metric paths
It sets up routing to go to network 2
It is the default for Cisco IPX load sharing
It enables load sharing on 2 paths if the paths are unequal metric paths
Question 11: You want to enable both arpa and snap encapsulation on one router interface. How do you do this?
The interface can handle multiple encapsulation types with no extra configuration
Assign two network numbers, one for each encapsulation type
Enable Novell-ether to run multiple encapsulation types
Both arpa and snap are enabled by default so you don’t have to configure anything
Question 13: To prevent Service Advertisements (SAPs) from flooding a network, Cisco routers do not forward them. How are services advertised to other networks?
Each router builds its own SAP table and forwards that every 60 seconds
Each router assigns a service number and broadcasts that
SAPs aren’t necessary with Cisco routers
Cisco routers filter out all SAPs
Question 15: In Novell’s use of RIP, there are two metrics used to make routing decisions. Select the correct metrics.
Ticks & Hops
Hops & Loops
Loops & Counts
Counts & Ticks
Online Quizzes of gs123 Cryptography and Network Security
Application Layer - HTTP & FTP - Quiz No.1
gs gs123
Cryptography and Network Security Online Quizzes
